SFGAmWorld.com
Untitled Document
Park Information
Latest News
Great America
Roller Coasters
Rides
Hurricane Harbor
Water Slides
Water Attractions
Advertisement

Iron Wolf Brake Run

Talk about anything that has to do with Six Flags Great America and Hurricane Harbor here.
Postby demonbulleagle on August 26th, 2008, 9:24 pm
If you look at this picture http://www.sfgamworld.com/gallery/v/SFGAm/IronWolf/IronWolf001.jpg.html you can see that the track is made to have a block section there, why is there no hardware for it?
I have seen this and wondered many times.
"The rides are GREAT, The shows are GREAT, the fun is GREAT. At Marriott"s GREAT AMERICA!"
demonbulleagle

User avatar
 
Posts: 601
Joined: October 13th, 2007, 9:46 pm
Location: Demon Seat 1A

Postby guitarhero119 on August 26th, 2008, 9:30 pm
a better question would be to ask why there is a gap in the track near the brake run... next time you ride it look in the brake run there are a pair of supports that don't look like the other ones surrounding the small gap...
Remember, there's nothing but air beneath the chair.
guitarhero119

User avatar
 
Posts: 209
Joined: November 1st, 2006, 10:50 pm
Location: 20 Min from Great America

Postby FParker185 on August 26th, 2008, 10:30 pm
the option was there on IW to add a 3'rd train, which was never needed. In order to have a 3'rd you need the block brake, so that was made like that just in case.

No idea on the gap, but SFGAm has added so many supports to IW, I'd say probably a quarter of the supports there are not original to the ride. Will keep an eye out for this gap, though I dont plan on going back to the park before fright fest.
Favorite Wood Coasters: The Voyage, Ravine Flyer II, Thunderhead, Balder
Favorite Steel: Voltron Nevera, Steel Vengeance, Expedition GeForce, Olympia Looping
Parks visited: 239, Coasters Ridden: Steel: 937, Wood: 179, Total: 1116
FParker185

User avatar
 
Posts: 4510
Joined: February 5th, 2004, 12:04 am
Location: Joliet, IL

Postby BP317 on August 26th, 2008, 10:33 pm
Plus it needed to stall for a bit because a service road is right underneath that part of the ride so they just made straight track and built the rest of the ride on the other side of the service road.

a better question would be to ask why there is a gap in the track near the brake run

I never even noticed that until someone pointed it out to me last winter...I dont think it was even like that before then? The official explanation given to me was "it was made to expand when it gets warmer" but it seems there is still a large gap and its totally obvious when walking under it. In addition to that all the problems they are having with the footers I think the ride is just falling apart.
Last edited by BP317 on August 26th, 2008, 10:36 pm, edited 1 time in total.
BP317
Webmaster/Site Admin

User avatar
 
Posts: 2135
Joined: September 2nd, 2006, 12:09 am

Postby CoasterCruiser on August 26th, 2008, 10:35 pm
I don't see any gap?
CoasterCruiser

User avatar
 
Posts: 128
Joined: July 20th, 2008, 1:47 am
Location: Naperville, Illinois

Postby Cove26flags on August 27th, 2008, 1:11 pm
well I'd hate to say but, if they would put that break run in, the corkscrew would go through a lot better.
Cove26flags

User avatar
 
Posts: 202
Joined: April 17th, 2004, 3:44 am
Location: Cedar Falls, IA

Postby FRD714 on August 27th, 2008, 4:19 pm
This has been discussed before. Please do a topic search next time.

post104026.html?hilit=iron%20wolf#p104026
Frank
FRD714

User avatar
 
Posts: 3547
Joined: October 26th, 2005, 4:46 pm
Location: Chicago

Postby saylorman47 on August 27th, 2008, 5:42 pm
AHH BACK SEAT MOD!!!

SHUN! SSHUN!
poor wolfie rip :(( hopewe get a neww bm wingrider for next year!11!
saylorman47

 
Posts: 315
Joined: April 4th, 2008, 2:26 pm
Location: rip wolfy

Postby coasterkidd100 on August 27th, 2008, 6:26 pm
^^ Wow, you sound just like one of the mods.
coasterkidd100

User avatar
 
Posts: 791
Joined: April 9th, 2008, 7:37 pm
Location: Fond du Lac

Postby Coastermonkey61 on August 27th, 2008, 6:36 pm
That topic is two freaking years old. Give me a break with your "please do a topic search next time" stuff.
Coastermonkey61

User avatar
 
Posts: 406
Joined: February 8th, 2008, 4:19 pm
Location: Seated, with my hands and feet inside the car

Postby Jackluver18 on August 27th, 2008, 6:51 pm
Iron Wolf has an attitude problem, no matter what it's always rough.
SF trips 09 = 15
SF trips 10= 11
SF trips 11 =7
Jackluver18

User avatar
 
Posts: 2776
Joined: October 16th, 2005, 12:54 am
Location: Moved from X-Flight's station to Bull.

Postby demonbulleagle on August 27th, 2008, 6:52 pm
I did a topic search this time, but I think my computer just plain hates me since even when i search for topics that I know exist it says there are no matches. But lets get back on topic now.
"The rides are GREAT, The shows are GREAT, the fun is GREAT. At Marriott"s GREAT AMERICA!"
demonbulleagle

User avatar
 
Posts: 601
Joined: October 13th, 2007, 9:46 pm
Location: Demon Seat 1A

Postby coasterkidd100 on August 27th, 2008, 11:31 pm
Cove26flags wrote:well I'd hate to say but, if they would put that break run in, the corkscrew would go through a lot better.


How? Wouldn't you go throught the corkscrew slower then?
coasterkidd100

User avatar
 
Posts: 791
Joined: April 9th, 2008, 7:37 pm
Location: Fond du Lac

Postby Cove26flags on August 27th, 2008, 11:45 pm
I was told that the reason why the corkscrew sucks so bad is because the actual corkscrew was designed for a slower speed.
Cove26flags

User avatar
 
Posts: 202
Joined: April 17th, 2004, 3:44 am
Location: Cedar Falls, IA

Postby Coastermonkey61 on August 28th, 2008, 12:26 am
coasterkidd100 wrote:
Cove26flags wrote:well I'd hate to say but, if they would put that break run in, the corkscrew would go through a lot better.


How? Wouldn't you go throught the corkscrew slower then?


You're on to something!!!
Coastermonkey61

User avatar
 
Posts: 406
Joined: February 8th, 2008, 4:19 pm
Location: Seated, with my hands and feet inside the car

Postby coasterkidd100 on August 28th, 2008, 10:41 am
Cove26flags wrote:I was told that the reason why the corkscrew sucks so bad is because the actual corkscrew was designed for a slower speed.


If it was going to make the corkscrew better they should have put the brake run in, I wish they would have put it in. Why would they make a corkscrew for a slow speed and then have it go throgh the corkscrew at a high speed?
coasterkidd100

User avatar
 
Posts: 791
Joined: April 9th, 2008, 7:37 pm
Location: Fond du Lac

Postby BP317 on August 28th, 2008, 1:18 pm
The maintained speed and intensity of the ride is what makes it awesome in my opinion and something very rare on newer B&Ms. I dont get how a trim would make the ride any better, instead of being rough it would be rough and slow.
BP317
Webmaster/Site Admin

User avatar
 
Posts: 2135
Joined: September 2nd, 2006, 12:09 am

Postby coasterkidd100 on August 28th, 2008, 3:48 pm
^Ya, it is rough enough we don't need to be slow and rough.
coasterkidd100

User avatar
 
Posts: 791
Joined: April 9th, 2008, 7:37 pm
Location: Fond du Lac

Postby Demon_07 on August 28th, 2008, 4:01 pm
^That corkscrew seems way too fast. It's the worst part of the ride.
Maybe A Great Day Is Just What You Need This Year
'09 Demon rides-50
'09 SFGAm Visits-21
Demon_07

User avatar
 
Posts: 1795
Joined: August 20th, 2007, 9:23 pm

Postby demonbulleagle on August 28th, 2008, 4:52 pm
coasterkidd100 wrote:^Ya, it is rough enough we don't need to be slow and rough.

It would not be rough and slow, before the lift is it rough there?????
"The rides are GREAT, The shows are GREAT, the fun is GREAT. At Marriott"s GREAT AMERICA!"
demonbulleagle

User avatar
 
Posts: 601
Joined: October 13th, 2007, 9:46 pm
Location: Demon Seat 1A

Postby Demon_07 on August 28th, 2008, 5:11 pm
No. That and the lift hill is the only place it isn't rough. :lol:
Maybe A Great Day Is Just What You Need This Year
'09 Demon rides-50
'09 SFGAm Visits-21
Demon_07

User avatar
 
Posts: 1795
Joined: August 20th, 2007, 9:23 pm

Postby coasterkidd100 on August 28th, 2008, 6:06 pm
^^ No but you only do a turn there and of course the lift is not, but the rest of the ride is.
coasterkidd100

User avatar
 
Posts: 791
Joined: April 9th, 2008, 7:37 pm
Location: Fond du Lac

Postby Demon_07 on August 28th, 2008, 7:10 pm
Well it could be rough up the lift....Ever gone in the second car of Demon ?
Maybe A Great Day Is Just What You Need This Year
'09 Demon rides-50
'09 SFGAm Visits-21
Demon_07

User avatar
 
Posts: 1795
Joined: August 20th, 2007, 9:23 pm

Postby demonbulleagle on August 28th, 2008, 8:13 pm
Demon_07 wrote:Well it could be rough up the lift....Ever gone in the second car of Demon ?

hey that car is fun!!!! and the reason it is not rough is because you are slower.
"The rides are GREAT, The shows are GREAT, the fun is GREAT. At Marriott"s GREAT AMERICA!"
demonbulleagle

User avatar
 
Posts: 601
Joined: October 13th, 2007, 9:46 pm
Location: Demon Seat 1A

Postby coasterkidd100 on August 28th, 2008, 9:39 pm
^ See, if they put those brakes on Iron Wolf the corkscrew would be rougher.
coasterkidd100

User avatar
 
Posts: 791
Joined: April 9th, 2008, 7:37 pm
Location: Fond du Lac

Next

Return to Six Flags Great America Forum

Who is online

Users browsing this forum: No registered users and 58 guests

Privacy Policy About Us Copyright Disclaimer E-Mail SFGAmWorld
COPYRIGHT - SFGAmWorld.com
All content and images on this site are Copyright 2001 - SFGAmWorld.com and may not be used without permission.
This is NOT the official site of Six Flags Great America, SFGAmWorld.com is not affilated or endorsed by Six Flags Great America.
SFGAmWorld.com does not make any guarantee on the accuracy of the information on this website and cannot be held responsible by the use of this information.
SIX FLAGS and all related indicia are trademarks of Six Flags Theme Parks Inc. ®, TM and © . The official Six Flags site can be found at SixFlags.com
BATMAN, SUPERMAN and all related characters and elements are trademarks of © DC Comics.
LOONEY TUNES and all related characters and elements are trademarks of and © Warner Bros. Entertainment Inc.©
The Wiggles Pty Ltd. SCOOBY-DOO and all related characters and elements are trademarks of and © Hanna-Barbera.